Waterproofing & surfacing systems

Are KEMPERDUR products colour fast?

Colour fastness refers to the resistance and stability of the colour to (UV) light and environmental influences ("light-fast"). Our decorative KEMPERDUR products are designed to be UV resistant and colour fast.

Where can you purchase KEMPEROL products?

From specialist trade merchants (usually roofing merchants).

How much does KEMPEROL Waterproofing cost compared to other waterproofing systems?

KEMPEROL waterproofing systems are high-quality products and therefore cost more than conventional waterproofing products that consist of sheeting.

Is there a fast waterproofing system available (PMMA)?

KEMPEROL AC Speed is currently the fastest PMMA-based waterproofing system. As an alternative, application of odourless KEMPEROL 2K-PUR can be accelerated by using KEMPEROL 2K-PUR Speedshot.

Are KEMPEROL products UV resistant?

The ageing resistance to light (UV light) according to ETAG 005 has been proven for our waterproofing products.

Are KEMPEROL waterproofing systems root proof?

All KEMPEROL waterproofing systems are root proof and tested to FLL standards.


Why should two-component primers be scattered with sand?

It is generally recommended to scatter two-component primers with an appropriate product. Scattering sand onto the surface is absolutely necessary for all epoxy resin-based products (KEMPERTEC EP Primer / KEMPERTEC EP5 Primer). By scattering natural quartz (1500-2000 g/m²) onto the primer, a surface with the appropriate roughness is achieved ensuring an optimum adhesive bond with the next layer.

This also serves as a protection of the primer against UV radiation, especially if longer work interruptions (longer than 2 weeks) are necessary.

How long does it take for KEMPERTEC Primer to be rainproof and ready to receive the next coat?

That obviously depends on the respective primer and the weather conditions while taking into account the substrate, ambient and application temperature. Please refer to the technical data sheet of the respective primer for the times.

Which primer must be used?

Individually according to substrate and waterproofing product, but generally a KEMPERTEC EP or KEMPERTEC EP5 Primer. In general, the priming recommendations must be observed.

Why do KEMPERTEC EP Primers have to be scattered with quartz sand?

The even scattering of KEMCO Natural Quartz in the still fresh primer is necessary for the following reasons. KEMPERTEC EP Primers must be scattered with sand due to the chemical properties of the epoxy resins, since it is not possible to determine an exact time window for resurfacing a non-scattered EP primer. In addition, scattering ensures a larger surface for enhancing waterproofing adhesion. Furthermore, the scattering of quartz sand protects the primer against environmental influences, such as UV radiation and mechanical stress.


What does pot life mean?

The pot life of reactive materials is the time during which the product can be applied. It is sometimes also called "period of use". It is therefore the time between mixing a multi-component product (or, in the case of one-component products, the opening of the container) and the end of its usability, i.e. the period of time in which the substance can still be "taken out of the pot". In most cases, the end of the pot life is indicated by a significant increase in viscosity (increase in toughness), which prevents further application. With our products, the pot life and workability time are not generally the same. The change in viscosity influences the absorbency and saturation behaviour considerably (in relation to the substrate or fleece)

As a rule of thumb, products with a viscosity significantly greater than that of liquid honey should no longer be applied.

Do KEMPEROL waterproofing systems comply with DIN standards and regulations, e.g. DIN 18531?

Almost all KEMPEROL waterproofing systems are approved products and display European Technical Approvals. KEMPEROL 2K-PUR, KEMPEROL 1K-PURKEMPEROL AC Speed, KEMPEROL BR correspond to the rules regarding waterproofing materials and the regulations of current waterproofing standards (DIN standards 18531 - 18535). For some KEMPEROL waterproofing systems there are general test certificates available for various applications.

You could not find the answer to your question?

If you still have any questions, simply contact our sales staff or application engineers! Our employees are always happy to help.

Find the right contact